As the weather gets better, you might be thinking about getting back out on your bike. If, like me, your bike’s MOT has expired you’ll need to get that sorted. So, here’s the full checklist of everything the MOT tester will be looking for, and how to check your bike!
2.1 Lights
These will be inspected to check:
their condition
that they work properly
that they’re secure
that the headlamp(s) are the correct colour
the rear lights, indicators and reflectors
The headlamp(s) will also be checked to see if the aim is correct.
2.2 Steering and suspension
These will be inspected to check:
their condition
that forks, handlebars, grips mountings, head bearings, swinging arm, shock absorbers and damping effect etc are secure and work properly
2.3 Wheels and tyres
These will be inspected to check:
their condition
that they’re secure
the size and type
correct fitment
the tread depth
the valve condition
2.4 Frame
This will be inspected to check:
that it’s free from cracks
for damage
for distortion
for corrosion which is likely to affect the steering or braking
2.5 Braking
This will be inspected to check:
the condition
the operation and performance (the efficiency test)
the brake controls
2.6 Exhaust system
This will be inspected to check:
it’s secure and complete
it’s not too noisy
2.7 Fuel system
This will be inspected to check:
for leaks
the security of its components
2.8 Seats
These will be inspected to check:
for the presence of a rider’s seat
that any seat is attached securely
2.9 Wheel alignment
These will be inspected to check for the correct alignment of front and rear wheels.
2.11 Horn
This will be inspected to check:
that it works properly
it’s suitable for the vehicle
2.12 Registration plates, vehicle identification and frame numbers
These will be inspected to check that they’re present and legible.
2.13 Drive chain and sprocket
These will be inspected to check:
that the chain isn’t too loose, tight or worn
that the sprockets aren’t too worn
that the chain guard is secure
2.14 Throttle
This will be inspected to check that it works properly.
2.15 Clutch lever
This will be inspected to check that it isn’t so bent, damaged or shortened that it can’t easily be used.
2.16 Footrests
These will be inspected to check that they’re present and fitted securely.
